
In order to simplify the analysis, due to the large inductance value of L, the set of L in series with Vi has been modelled by a dc current source, Ii. Similarly, due to the large capacitance of Co,. . input voltage output voltage switching frequency filter inductor filter capacitor resonant inductor resonant capacitor resonant capacitor load resistance . In this paper, analysis, design, experimental, and simulation results of soft-switching boost dc/dc converter have been presented. By using the soft-switching technique, voltage and current stresses are reduced. At. energy storage elements result in circuit complexity, high costs, and high conduction losses. In [16], two soft-switching dc/dc converters have been presented. One of the advantages of this structure is the smaller number of the elements, along with the smaller number of the energy storage elements. [pdf]
The prototype converter with a rated power of 300 W was assembled and tested considering future application to residential battery energy storages. The experimental test results prove feasibility of the soft-switching method in the proposed converter.
To further enhance the performance of SiC-device-based power converters, soft-switching technique is a promising technology, and can handle the aforementioned concerns by turning the power device on and off with a slower voltage and current slope to reduce EMI noise.
With the rapid development of flexible interconnection technology in active distribution networks (ADNs), many power electronic devices have been employed to improve system operational performance. As a novel fully-controlled power electronic device, energy storage integrated soft open point (ESOP) is gradually replacing traditional switches.
Stable soft-switching operation is maintained with a wide variation of the CF-side voltage and power levels; moreover, the current stress on the switches never exceeds the input current. Throughout the operation, low circulating power and constant switching frequency was maintained.
This comparison has been made with respect to seven criteria: the number of switches, the number of energy storage devices, ZVS at ON transitions of the main switch, or ZCS at OFF transitions of the main switch, voltage and current stresses, and efficiency at 200 W output power.
The application of the ZVS technique combined with the SiC device in these converters can further improve power density and lead to a more compact power electronic conversion systems for high-voltage and high-power applications. Kassakian J, Jahns T (2013) Evolving and emerging applications of power electronics in systems.

Yemen has recently experienced a severe power shortage, unable to meet the power needs of its population and infrastructure. In 2009, the installed power capacity was about 1.6 GW, while, in fact, the power supply gap was about 0.25 GW. The power development plan (PDP) forecasts and estimates the capacity demand. . As mentioned earlier, according to the International Energy Agency, in 2000, oil made up 98.4% of the total primary energy supply in Yemen, while in. . Yemen had a strategy to develop and improve its electrical potential before the events of 2011. The Public Electricity Corporation is responsible for developing this strategy, which is. . According to the latest report of the World Energy Statistics Review 2020, 84% of the world’s energy is still supplied by fossil fuels, while renewable energy accounts for only 11% of global primary. [pdf]
Yemen is dealing with the dilemma of energy networks that are unstable and indefensible. Due to the fighting, certain energy systems have been completely damaged, while others have been partially devastated, resulting in a drop in generation capacity and even fuel delivery challenges from power generation plants.
This study reviews Yemen’s electricity and energy sector before and after the onset of the conflict that began in 2015 and presents the current state of power generation, transmission, and distribution systems in the country by assessing the negative impact in the electricity sector caused by the ongoing conflict. 2.
Abstract:A severe energy crisis has plagued Yemen for decades, and most of the population lack access to electricity. This hasharmed the country’s economic, social, and industrial growth. Yemen generates electricity mainly from fossil fuels, despite having a high potential for renewable energy.
It is possible for Yemen to use one of two types of solar power supply: centralized (on-grid) for larger farms or decentralized (off-grid) for small-scale power generation. The latter application can be used for rural electrification, which affects three-quarters of Yemen’s population but receives only a quarter of the country’s total power.
In 2017, oil made up about 76% of the total primary energy supply, natural gas about 16%, biofuels and waste about 3.7%, wind and solar energies etc. about 1.9%, and coal about 2.4%. According to the International Energy Agency report, the final consumption of electricity in Yemen in 2017 was 4.14 TWh.
Based on the findings,Yemen is one of the world’s wealthiest countries in terms of sunlight and wind speed, and these two resources are abundant in all regions of the country. In addition, this paper sheds light on the solar energy revolution that has arisen since the war started due to the complete outage of the national electricity.
We are deeply committed to excellence in all our endeavors.
Since we maintain control over our products, our customers can be assured of nothing but the best quality at all times.