
Sephu plant will serve as an addition to the 180 kW grid-connected ground-mounted solar photovoltaic power station in Rubesa (near ), which became operational in October 2021. The Sephu plant is currently under construction over an area of 65 acres in Yongtru village, situated in the . Upon its completion, the overall installed capacity of the facility will reach 22.38 megawatts and is expected to be complete by March 2025. It was initially planned a. [pdf]
The Chairperson of the National Council of Bhutan, Lyonpo Tashi Dorji, inaugurated the 180kW grid-tied ground mounted Solar Photo-Voltaic Power Plant at Rubesa, Wangdue Phodrang on October 4, 2021.
The commissioning and inauguration of the 180kW grid-tied ground mounted solar photo-voltaic power plant marks the start of Bhutan’s investment in grid-tied solar energy as a viable alternative energy source in the face of soaring domestic demand and climate change.
Minister of Energy and Natural Resources, Loknath Sharma said, “Sephu solar plant is the first medium solar farm in the country.” The minister said that Sephu solar plant marked the beginning of achieving a 500-megawatt energy target through solar power in the next three years. He said that the plant project is undertaken by the ministry.
When Shingkhar solar power plant was dropped the ADB couldn’t fund the wind farm as it became economically non-viable. As per the Renewable Energy Management Master Plan 2016, it is estimated that Bhutan has the potential to produce 12 gigawatts of solar and 760 megawatts of wind energy.

Kryogene Energiespeicherung (Cryogenic Energy Storage/CES, auch Liquid Air Energy Storage/LAES) bezeichnet den Einsatz tiefkalter () Flüssigkeiten, wie beispielsweise flüssige Luft oder , als . Beide Kryogene werden bereits in Fahrzeugantrieben genutzt. Der Erfinder Peter Dearman entwickelte ursprünglich ein mit flüssiger Luft betriebenes Fahrzeug, nutzte diese Technologie dann aber auch für einen Netzenergiespei. [pdf]
Ein 1600 m3 Flüssiglufttank kann etwa 220 MWh elektrische Energie speichern. Zusammen mit einem Technologiepartner haben wir ein System mit 80 MW Leistungsabgabe entwickelt, das auf verfügbaren Komponenten basiert und bereit zur Demonstration ist. Gleichzeitig arbeiten wir an der nächsten Generation von Systemen mit verbesserter Performance.
Ein neuer Stromspeicher auf Basis flüssiger Luft soll die Versorgungssicherheit bei Nutzung erneuerbarer Energien garantieren. München (Deutschland). Erneuerbare Energien wie Solar-, Wind- und Wasserkraft können zwar CO2-neutral Strom produzieren, unterliegen in ihrer Leistung aber einer hohen Volatilität.
Es nutzt flüssige Luft, den Energiespeicher und Abwärme, um die thermische Reexpansion der Luft zu verstärken. Aus der flüssigen Luft wurden Kohlenstoffdioxid und Wasser entfernt, da diese bei der Speichertemperatur gefrieren würden. Der Wirkungsgrad beträgt zurzeit weniger als 15 Prozent.
Flüssige Luft beansprucht nur noch ein Tausendstel des ursprünglichen Volumens und lässt sich über lange Zeit in einem großen Vakuumgefäß bei Atmosphärendruck lagern. Bei hohem Strombedarf wird flüssige Luft mit hohem Druck in einen Wärmetauscher gepumpt, der als Heizkessel dient.
We are deeply committed to excellence in all our endeavors.
Since we maintain control over our products, our customers can be assured of nothing but the best quality at all times.