
The province of Adrar has been selected for this study thanks to its potential in both wind and solar energies; it is situated in the heart of the Algerian desert located at 27.52° N and 0.17° W. The district occupies 663 km2 and has a population of about 65,000 inhabitants (Djamai et al. 2011). The climate in the province is a. . The sizing of the system is based on the production capacity and the energy potential of Adrar, while the design addresses the. . The wind farm consists of a set of wind turbines, which are divided into dynamic and mechanical models, in addition to the electrical model of a doubly fed induction generator (DFIG) linked to. . PI controllers are widely used in the industry thanks to their simple design and good performance. The controller uses the error signal to generate a. [pdf]
Furthermore, a 500 MW solar tender was launched by Algerian utility Sonelgaz at the beginning of December. In 2019, the Algerian government held tenders for off-grid, hybrid solar-diesel, and PV projects. The procurement rounds were part of the country’s plans to deploy 15 GW of solar energy generation capacity by 2030.
The Algerian government is trying to attract investments in wind and solar energies by establishing suitable policies to install 5 GW of wind power and 13.6 GW of solar PV by 2030.
Sonelgaz Algeria Solar PV Park is a 233MW solar PV power project. It is located in Adrar, Algeria. According to GlobalData, who tracks and profiles over 170,000 power plants worldwide, the project is currently active. It has been developed in multiple phases. Post completion of construction, the project got commissioned in 2015.
Algeria is known for its important potential in hydrocarbon resources, but it also houses a huge solar energy potential (Kabir et al. 2018; Bouraiou et al. 2020) thanks to its location in the Mediterranean basin. The southern part of the country receives more sunshine as it lies exactly in the sunbelt.
In Algeria, one the main issues for the integration of distributed RE systems is that the grid is designed for unidirectional energy flow from high voltage lines to low voltage distribution system.
Selected projects will be awarded a 25-year power purchase agreement (PPA). Algeria had an installed PV capacity of 423 MW at the end of 2020. Image: gloctor/Pixabay Algeria's Ministry of Energy Transition and Renewable Energy has launched yesterday a tender for the deployment of 1 GW of solar capacity.

Similar to the grid-connected photovoltaic power generation system, the BOOST boost circuit is used to increase the photovoltaic input voltage and achieve the maximum PowerPoint tracking control MPPT function on the photovoltaic input side [8,9,10,11,12,13], so that the intermediate stage DC bus voltage meets. . The AC-side inverter circuit converts the electrical energy from the DC side into alternating current, which is input to the grid or supplied to the local loads. The classic H6 circuit structure. . The energy storage side mainly completes the charge and discharge management of the energy storage batteries, and converts the bus voltage to the. [pdf]

Since inexpensive high-performance DSP controllers with integrated peripherals are readily available these days, digital controllers for power. . After analyzing the parameter mismatch, the effect of a control time delay on the performance of a digital platform with PCC is also investigated.. . Since deadbeat-based PCC is built on the cancellation of the zeros and poles in a system model, the system performance can significantly be degraded by a mismatch between a modeling parameter and an actual parameter.. [pdf]
In this control strategy, the voltage of PCC is tracked by PV system in real time. When the voltage of PCC is normal, inverter will output in the way of maximum power point tracking (MPPT).When the voltage of PCC exceeds the upper limit, the inverter will regulate the voltage using the remaining capacity preferentially.
The PCC voltage is at this time: After photovoltaic power is connected to the grid, photovoltaic power is output according to the maximum power point tracking (Maximum Power Point Tracking, MPPT) and the unit power factor is generated, that is, the active power is output according to the maximum power and reactive power.
Bhole and Shah employed a Predictive Current Control (PCC) methodology to solve power quality issues in grid-connected PV systems. This work mainly intends to compensate for the reactive power and reduce the total harmonics distortion using an Active Power Filtering (APF) technique.
The harmonic amplifying characteristic curve of PCC in full frequency range is established, and the influence of inverter parameters, reactive power compensation device and distributed transmission line model on harmonic characteristics is deeply analyzed.
These results show that the inverter system with PCC can achieve a fast time response and little steady-state error, where the step response has zero steady-state error and the sinusoidal response has one sampling period of lag. PCC: a step response; b sinusoidal response
A comparison has been made to analyze the performance of single-phase grid-connected inverter systems with PCC and ICC. Experimental results are provided to verify the effectiveness of the designed current controllers, and the output current of the inverter system with ICC generally has a lower THD than that of the inverter system with PCC.
We are deeply committed to excellence in all our endeavors.
Since we maintain control over our products, our customers can be assured of nothing but the best quality at all times.