
There is increasing interest in solar PV installations in Uganda, however, there is little or no information available on performance of solar PV systems in Uganda. Since solar PV performance is site specific, there is ne. . Ar Annual revenue ($)As Annual saving ($)BCR . . The technical performance of solar PV installation depends on factors that include; the installation's location and its associated weather and meteorological conditions, efficiencies of th. . 2.1. Study area 2.2. Description of the power plantAccess solar power plant, which was commissioned by the end of November 2016 and launch. . 3.1. Technical performance 3.2. Economic performance indicatorsIn estimating the economic indicators, which are discussed in this section, the following assump. . Using IEC standard 61724–1 and a combination of dynamic and static capital investment methods, the technical performance and economic viability of the first utility-scale g. [pdf]
Given Uganda's total surface area of 236 040 km 2, and, on average, over 5 kWh/m 2/day global solar radiation on horizontal surface, Uganda has more than 400 000 TWh of solar energy potential, each year falling on its surface area.
Historically, the generation capacity of Uganda's electricity sub-sector grew from 609.4 MW in 2011 to 1268.8 MW as of 2020 ( Fig. 1), and it is dominated by hydropower, which accounted for 79.65% by 2020.
Overall, the energy sector of Uganda is dominated by use of biomass of fuel wood, charcoal and agricultural residues, contributing 88% to national primary energy mix by mid-2019, while electricity and petroleum products contributed 2% and 10%, respectively [32 ]. This overdependence on wood fuel is mainly due to its accessibility and affordability.
The approved Government of Uganda Vision 2040 development plan anticipated an increase in the country's power generation from the 822 MW (in 2012) to about 41 800 MW (by 2040) and electricity consumption per capita to 3668 kWh/year [34 ].
Table 6. Summary of the estimated economic indicators for the Soroti solar power plant. When a tariff of US$0.1637/kWh is used, which is the amount receivable by the project owner, the simple payback period and discounted payback period are estimated as 8.20 years and 9.28 years, respectively.
For an economically viable utility-scale grid connected solar PV system, a payback period between 8 and 18 years is recommended by Ref. . Therefore, at this tariff rate, it can be concluded that Soroti solar power plant is economically viable.

Grid energy storage (also called large-scale energy storage) is a collection of methods used for on a large scale within an . Electrical energy is stored during times when electricity is plentiful and inexpensive (especially from sources such as and ) or when demand is low, and later returned to the grid. What is grid-scale battery storage? Battery storage is a technology that enables power system operators and utilities to store energy for later use. A battery energy storage system (BESS) is an electrochemical device that charges (or collects energy) from the grid or a power plant and then discharges that energy at a later time [pdf]
Grid energy storage (also called large-scale energy storage) is a collection of methods used for energy storage on a large scale within an electrical power grid.
Grid energy storage is used to shift generation from times of peak load to off-peak hours. Power plants are able to run at their peak efficiency during nights and weekends. Supply-demand leveling strategies may be intended to reduce the cost of supplying peak power or to compensate for the intermittent generation of wind and solar power.
A battery energy storage system (BESS) is an electrochemical device that charges (or collects energy) from the grid or a power plant and then discharges that energy at a later time to provide electricity or other grid services when needed.
In an electrical grid without energy storage, generation that relies on energy stored within fuels (coal, biomass, natural gas, nuclear) must be scaled up and down to match the rise and fall of electrical production from intermittent sources (see load following power plant).
Grid-scale storage, particularly batteries, will be essential to manage the impact on the power grid and handle the hourly and seasonal variations in renewable electricity output while keeping grids stable and reliable in the face of growing demand. Grid-scale battery storage needs to grow significantly to get on track with the Net Zero Scenario.
Energy storage is one option to making grids more flexible. An other solution is the use of more dispatchable power plants that can change their output rapidly, for instance peaking power plants to fill in supply gaps.

Energy storage is a potential substitute for, or complement to, almost every aspect of a power system, including generation, transmission, and demand flexibility. Storage should be co-optimized with clean generation, transmission systems, and strategies to reward consumers for making their electricity use more flexible. . Goals that aim for zero emissions are more complex and expensive than NetZero goals that use negative emissions technologies to achieve a. . The need to co-optimize storage with other elements of the electricity system, coupled with uncertain climate change impacts on demand and supply, necessitate advances in analytical tools to. . The intermittency of wind and solar generation and the goal of decarbonizing other sectors through electrification increase the benefit of. . Lithium-ion batteries are being widely deployed in vehicles, consumer electronics, and more recently, in electricity storage systems. These batteries have, and will likely continue to have, relatively high costs. [pdf]
Storage enables electricity systems to remain in balance despite variations in wind and solar availability, allowing for cost-effective deep decarbonization while maintaining reliability. The Future of Energy Storage report is an essential analysis of this key component in decarbonizing our energy infrastructure and combating climate change.
In the electricity sector, battery energy storage systems emerge as one of the key solutions to provide flexibility to a power system that sees sharply rising flexibility needs, driven by the fast-rising share of variable renewables in the electricity mix.
In the electricity sector, governments should consider energy storage, alongside other flexibility options such as demand response, power plant retrofits, or smart grids, as part of their long-term strategic plans, aligned with wind and solar PV capacity as well as grid capacity expansion plans.
Energy storage is a potential substitute for, or complement to, almost every aspect of a power system, including generation, transmission, and demand flexibility. Storage should be co-optimized with clean generation, transmission systems, and strategies to reward consumers for making their electricity use more flexible.
Accordingly, battery energy storage systems are the fastest growing storage technology today, and their deployment is projected to increase rapidly in all three scenarios. Storage technologies and potential power system applications based on discharge times. Note: T and D deferral = transmission and distribution investment deferral.
The need to co-optimize storage with other elements of the electricity system, coupled with uncertain climate change impacts on demand and supply, necessitate advances in analytical tools to reliably and efficiently plan, operate, and regulate power systems of the future.
We are deeply committed to excellence in all our endeavors.
Since we maintain control over our products, our customers can be assured of nothing but the best quality at all times.