Integrating AXIstorage Li 7S with Victron Energy Systems: A Technical Guide

Integrating AXIstorage Li 7S with Victron Energy Systems: A Technical Guide

Why This Battery-Grid Combo Works Like PB&J

When Victron Energy’s inverters shake hands with the AXIstorage Li 7S, it’s like watching Tesla’s Powerwall meet a Swiss Army knife – except this pairing’s been rigorously tested by both companies’ R&D teams. Designed as a clone of BMZ ESS hardware, this lithium battery system brings military-grade precision to energy storage when configured properly.

Victron’s Dance Partners

• All 48V MultiPlus and Quattro inverters
• Color Control GX (mandatory brain of the operation)
• ESS Assistant software (the choreographer)

Wiring: Where Magic Meets Physics

Forget USB cables – here we’re dealing with RJ-45 connectors that could make network engineers sweat. The critical pinout resembles a secret handshake:

Function	VE.Can RJ-45	AXIstorage RJ-45
GND	Pin 3	Pin 2
CAN-L	Pin 8	Pin 5
CAN-H	Pin 7	Pin 4

Pro tip: That VE.Can terminator isn’t optional – skip it and your system will ghost you faster than a Tinder date.

Configuration Pitfalls to Avoid

• Solar charger compatibility: VE.Direct only (VE.Can causes bus speed conflicts)
• Minimum CCGX firmware: v1.72 or newer
• Float voltage reset requirement after ESS Assistant setup

Software Settings: The Digital DNA

In VEConfigure, we’re cooking up a special recipe:

1. Set battery monitor to Enabled
2. Input 121.5Ah capacity (no rounding – precision matters)
3. Lock absorption voltage at 60.75V like Fort Knox

The ESS Assistant demands specific selections:

• Fourth battery type in the menu
• Sustain voltage: 50.0V (default values are gospel here)
• Dynamic cutoff parameters: Hands-off zone

Real-World Performance Quirks

Don’t expect Swiss watch accuracy – a 30A discharge limit might swing ±5A. The Parameters page becomes your crystal ball, showing actual charge/discharge rates that’d make weather forecasters jealous.

Scaling Your Energy Empire

Need more juice? Paralleling multiple AXIstorage Li 7S units is possible, but requires direct coordination with AXIstorage’s tech team. It’s like building LEGO towers – possible, but you’ll want the instruction manual from the creators.

Visit our Blog to read more articles